When finished, the installation program displays the
Complete dialog (as in Figure 10-49), telling you to reboot your
computer. Remove any diskette from the diskette drive (unless you
skipped the LILO installation, in which case you must use the boot disk
created during the installation), or the Red Hat Linux CD if your system booted
from the CD-ROM.
Select OK to reboot your newly installed system.
After your computer's normal power-up sequence has completed, you should
see LILO's standard boot: prompt, at which you can do
any of the following:
Press Enter -- Causes LILO's default boot entry (as
seen in Figure 10-25) to be booted.
Enter a Boot Label, followed by Enter -- Causes
LILO to boot the operating system corresponding to the boot label.
Wait -- After LILO's timeout period, (which, by default, is five
seconds) LILO will automatically boot the default boot entry.
Do whatever is appropriate to boot Red Hat Linux. You should see one or more
screens of messages scroll by. Eventually, you should see either a
graphical login screen, or a login: prompt.
Congratulations! Your Red Hat Linux installation is complete!
Download
