Download   Online Shop   Red Hat Network
Home  |  Products & Services  |  Support  |  Training  |  Partners  |  Documentation

Next Previous Contents Wacom Tablet HOWTO Stefan Runkel <runkel@runkeledv.de> Version 1.0.7 of Dec 29, 2024 Installation of (not only) Wacom graphic tablets under linux and / or xfree86 1. Copyright 2. Introduction 2.1 New Versions of this Document 2.2 Feedback and Corrections 2.3 Acknowledgements 3. Requirements 3.1 Which Hardware is supported 3.2 Which Software is needed 3.3 Which Software is supported 4. Tablets as Mouse-Replacement for the Linux-Console 4.1 Tablets and gpm 5. Tablets with XFree 3 and XFree 4 5.1 Required XFree Version 5.2 Sample XF86Config snippet for XFree 3 5.3 Sample XF86Config snippet for XFree 4 5.4 Syntax Difference between XFree 3 and XFree 4 5.5 Section Module 5.6 Device Type (XF3) and Type (XF4) 5.7 DeviceName (XF3) and Identifier (XF4) 5.8 Port (XF3) and Device (XF4) 5.9 DebugLevel 5.10 Serial Num (intuos series only) 5.11 Mode absolute, Mode relative 5.12 Device Modes Extension, Core, AlwaysCore 5.13 HistorySize 5.14 Suppress 5.15 TiltMode (XF3) and Tilt (XF4) 5.16 MaxX, MaxY, MaxZ (since alpha 20) 5.17 ResolutionX, ResolutionY, ResolutionZ (since alpha 20) 5.18 TopX, TopY, BottomX, BottomY Statements 5.19 KeepShape 5.20 Threshold 5.21 USB (since alpha 20) 6. Changing configuration from within a running X-Server 6.1 Setting up the Gimp to use XInput devices 6.2 The Switch Device 6.3 Buttons 6.4 Button Mapping with xmodmap for Devices in Core Mode 6.5 Button Mapping with xinput for Devices in Extension Mode 6.6 xsetmode - changing absolute / relative mode 6.7 xsetpointer - setting the default core device 6.8 Keys 6.9 Utilities to use more than one tablet and for toggle support on / off 7. XFree FAQ - Problems And Questions 7.1 Gnome and Gimp only work like a usual mouse, without pressure and tilt. 7.2 Is the wheel of the mouse (cursor) supported ? 7.3 How can I find out the intuos Serial Num of my tool ? 7.4 How do I change the action of each button of my tool? 7.5 How can I use the intuos/artpad/ultrapad macro area ? 7.6 Is it possible to define multiple active areas on the same tablet ? 7.7 Can I use more than one tablet at the same time ? 7.8 The Wacom Driver eats my CPU Time. Any Hint ? 8. Gpm FAQ - Problems And Questions 8.1 NCurses programs only support cut and paste with my new gpm 9. Further Information / Used Documents Next Previous Contents

	Search for:  on  redhat.com Linux Sites The Marketplace Downloads Support Solutions   Powered by Google Products & Services   :   Download   :   Support   :   Training   :   Partners & Programs © 2001 Red Hat, Inc. All rights reserved.       About Red Hat   :   Legal statement   :   Privacy statement   :   Y2K statement   :   Contact Red Hat