Download   Online Shop   Red Hat Network
Home  |  Products & Services  |  Support  |  Training  |  Partners  |  Documentation

Next Previous Contents Linux VPN Masquerade HOWTO John D. Hardin <jhardin@wolfenet.com> $Revision: 1.6 $ $Date: 2025/02/20 10:59:16 $ How to configure a Linux firewall to masquerade IPsec- and PPTP-based Virtual Private Network traffic, allowing you to establish a VPN connection without losing the security and flexibility of your Linux firewall's internet connection and allowing you to make available a VPN server that does not have a registered internet IP address. Brief information on configuring the VPN client and server is also given. 1. Introduction 1.1 Introduction 1.2 Feedback, Credits & Resources 1.3 Copyright & Disclaimer 2. Background Knowledge 2.1 What is a VPN? 2.2 What is IPsec? 2.3 What is PPTP? 2.4 What is FWZ? 2.5 Why masquerade a VPN client? 2.6 Can several clients on my local network use IPsec simultaneously? 2.7 Can several clients on my local network use PPTP simultaneously? 2.8 Can I access the remote network from my entire local network? 2.9 Why masquerade the VPN server? 2.10 Why patch the Linux kernel? 2.11 Current Status 3. Configuring the Linux firewall 3.1 Example network 3.2 Determining what needs to be done on the firewall 3.3 Patching and configuring the 2.0.x kernel for VPN Masquerade support 3.4 Patching and configuring the 2.2.x kernel for VPN Masquerade support 3.5 ipfwadm setup for a Private-IP VPN Client or Server 3.6 ipchains setup for a Private-IP VPN Client or Server 3.7 A note about dynamic IP addressing 3.8 Additional setup for a Private-IP VPN Server 3.9 ipfwadm setup for a Registered-IP VPN Server 3.10 ipfwadm setup for a Registered-IP VPN Client 3.11 ipchains setup for a Registered-IP VPN Server 3.12 ipchains setup for a Registered-IP VPN Client 3.13 VPN Masq and LRP 3.14 VPN Masq on a system running FreeS/WAN or PoPToP 4. Configuring the VPN client 4.1 Configuring a MS W'95 client 4.2 Configuring a MS W'98 client 4.3 Configuring a MS W'ME client 4.4 Configuring a MS NT client 4.5 Configuring for network-to-network routing 4.6 Masquerading Checkpoint SecuRemote-based VPNs 5. Troubleshooting 5.1 Testing 5.2 Possible problems 5.3 Troubleshooting 5.4 MS PPTP Clients and domain-name issues 5.5 MS PPTP Clients and Novell IPX 5.6 MS network password issues 5.7 If your IPsec session always dies after a certain amount of time 5.8 If VPN masquerade fails to work after you reboot 5.9 If your second PPTP session kills your first session 6. IPsec masquerade technical notes and special security considerations 6.1 Limitations and weaknesses of IPsec masquerade 6.2 Proper routing of inbound encrypted traffic Next Previous Contents

	Search for:  on  redhat.com Linux Sites The Marketplace Downloads Support Solutions   Powered by Google Products & Services   :   Download   :   Support   :   Training   :   Partners & Programs © 2001 Red Hat, Inc. All right reserved.       About Red Hat   :   Legal statement   :   Privacy statement   :   Y2K statement   :   Contact Red Hat